Experimental investigation of gas-liquid flow in a vertical venturi installed downstream of a horizontal blind tee flow conditioner and the flow regime transition

A venturi device is commonly used as an integral part of a multiphase flowmeter (MPFM) in real-time oil-gas production monitoring. Partial flow mixing is required by installing the venturi device vertically downstream of a blind tee pipework that conditions the incoming horizontal gas-liquid flow (for an accurate determination of individual phase fraction and flow rate). To study the flow-mixing effect of the blind tee, high-speed video flow visualization of gas-liquid flows has been performed at blind tee and venturi sections by using a purpose-built transparent test rig over a wide range of superficial liquid velocities (0.3–2.4 m/s) and gas volume fractions (10–95%). There is little ‘homogenization’ effect of the blind tee on the incoming intermittent horizontal flow regimes across the tested flow conditions, with the flow remaining intermittent but becoming more axis-symmetric and predictable in the venturi measurement section. A horizontal (blind tee) to vertical (venturi) flow-pattern transition map is proposed based on gas and liquid mass fluxes (weighted by the Baker parameters). Flow patterns can be identified from the mean and variance of a fast electrical capacitance holdup measured at the venturi throat.     

Numerical Simulation of Sterilization Processes for Shear‐Thinning Food in Taylor‐Couette Flow Systems

The performance of the Taylor‐Couette flow apparatus as a heat sterilizer is numerically investigated. The destruction of Clostridium botulinum and thiamine (vitamin B1) was selected as model reaction. When Taylor vortices were formed in the annular space, the heat transfer significantly enhanced as compared to the case without vortex flow. As a result, the equivalent lethality calculated from the temperature field increased, which is regarded as a quantum leap. Conversely, the improvement of heat transfer induced destruction of thiamine. These results suggest that there is a trade‐off relationship between the enhancement of heat transfer and the avoidance of thermal destruction of nutritional components. In conclusion, the Taylor‐Couette flow sterilizer has the potential for process intensification in heat sterilization processes.     

Effect of Newtonian heating/cooling on free convection in an annular permeable region in the presence of heat source/sink

The influence of Newtonian heating/cooling in the presence of heat source/sink has been investigated on laminar free convective flow in a vertical annular permeable region. The mathematical model for the problem has been considered as a boundary value problem consisting of two simultaneous ordinary differential equations. The boundary value problem has been transformed to nondimensional form. This has given rise to a number of parameters representing both geometrical and physical features of the problem. Closed‐form analytical solutions of the governing equations have been obtained for two different cases of internal heat generation/absorption. To assess the effects of governing parameters on the fluid velocity and temperature, a number of profiles of these field variables have been presented. The efficacy of the distinct processes on the field variables has been discussed extensively. The main outcome obtained in this study is that the velocity as well as temperature is enhanced in the case of the Newtonian heating while the opposite behavior occurs in the Newtonian cooling for both cases of source and sink. Furthermore, the influence of the governing parameters has been shown on the skin friction, volume flow rate, and the Nusselt number.     

新型地锚张弦梁式泥石流格栅坝构件受力的简化计算方法

针对常见泥石流防治结构被冲击破坏的问题，基于“柔性消能”理念，结合张弦梁结构和竖向预应力锚杆技术，提出一种既能改善结构受力性能、增加结构整体抗冲击能力、保证结构安全可靠，又能减小结构构件截面尺寸、节约成本、便于现场施工组装和后期运营维护的新型地锚张弦梁式泥石流格栅坝，并阐述其技术原理。根据泥石流荷载分布和新型地锚张弦梁式泥石流格栅坝的受力特征，给出其简化的内力计算方法；并利用SAP2000建立新结构有限元模型，分析了结构的整体受力，验证了构件简化计算方法的合理性；结合Python语言和Qt De? signer软件开发了相应的设计计算软件，对新型地锚张弦梁式泥石流格栅坝的内力进行求解。结果表明：提出的新结构抗冲击性能好，构件受力均匀；以后设计中应关注竖杆的剪切脆性破坏和立柱偏心受力情况，保证结构安全；变形协调仅使底层张弦梁与竖杆内力偏大，实际工程应用时，应着重验算底层构件，防止其破坏；文中提出的简化计算方法能较准确的反映结构的受力特性，具有一定的合理性，研究可为新型地锚张弦梁式泥石流格栅坝的设计计算和推广应用提供理论依据和技术支持。     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Rheokinematics for product development—Formulation screening in rotational rheometers

Product formulations for industrial processes are typically developed at laboratory scale. However, the mixing conditions are not easily mimicked in the laboratory. A rotational device is proposed in this study as a fast laboratory-scale formulation development, which enables mimicking the mixing conditions in the industrial process. The geometrical configurations of the rotational device are from rheometry devices (plate-plate and cone-plate). The main advantages of this method are the small amounts of raw materials and shorter testing times. This methodology is applied to an industrial case study, the reaction injection molding (RIM) process. The mixing length scales evolution in the rotational rheometer were matched to those in RIM machines. The main novelty of this study is the introduction of a protocol that bridges the processing conditions at laboratory using small amounts of raw materials to high throughput continuous flow reactors.     

Effect of ultrasonic waveforms on gas–liquid mass transfer in microreactors

This study aims to investigate the effect of ultrasonic waveforms on the gas–liquid mass transfer process. For a given load power (P), continuous rectangular wave yielded stronger bubble oscillation and higher mass transfer coefficient (k_La) than continuous triangular and sinusoidal wave. For pulsed ultrasound, the k_La decreased monotonically with decreasing duty ratio (D), resulting in weak enhancement at low D (≤33%). For a given average load power (P_A), concentrating the P for a shorter period resulted in a higher k_La due to stronger cavitation behavior. For a given P_A and D, decreasing the pulse period (T) led to an increase in k_La, which reached a constant high level when the T fell below a critical value. By optimizing the D and T, a k_La equivalent to 92% of that under continuous ultrasound was obtained under pulsed ultrasound at a D of 67%, saving 33% in power consumption.     

Experimental study on prediction model of wet gas pressure drop across single-orifice plate in horizontal pipes in the low gas phase Froude number region

The pressure drop prediction of wet gas across single-orifice plate in horizontal pipes had been solved satisfactorily under an annular-mist flow in the upstream of orifice plates. However, this pressure drop prediction is still not clearly determined when the upstream is in an intermittent flow or stratified flow, which is corresponding to a region of low Fr_G (gas phase Froude number) in the flow pattern map of wet gases. In this study, the wet gas pressure drop across a single-orifice plate was experimentally investigated in the low Fr_G region. By the experiment, the flow pattern transition in the downstream of single-orifice plates, as well as the effects of Fr_G and Fr_L (liquid phase Froude number) on Φ_G (gas phase multiplier), were determined and compared when the upstream is in the flow pattern transition and the stratified flow region, respectively. Prediction performances were examined on the available pressure drop models. It was found that no model could be capable of jointly predicting the wet gas pressure drop in the low Fr_G region with an acceptable accuracy. With a new method of correlating Fr_G and Fr_L simultaneously, new correlations were proposed for the low Fr_G region. Among which the modified Chisholm model shows the best prediction accuracies, with the prediction deviations of Φ_G being within 7% and 3% when the upstream is in flow pattern transition and stratified flow region, respectively.     

基于数据运营安全的个人信息保护

个人信息因其自身携带隐私特性,与每个个体息息相关。个人信息保护不当,影响公众权益、企业利益以及社会秩序。在互联网、大数据、5G万物互联的时代,个人信息被广泛收集和使用,必须妥善解决个人信息保护问题,才能保障整个数据产业健康发展。而现有的个人信息保护方法或技术,不足以应对新形势下的保护诉求。基于数据运营安全的个人信息保护,针对当前个人信息保护的新形势和新诉求,提出结合人工智能,通过数据运营安全对结构化、半结构化、非结构化的个人信息流动的保护,涵盖从生产到运维,从采集、传输、存储、处理、分析、共享、销毁全生命周期保护,深入数据运营中内嵌防护,同时与业务解耦,达到保护个人信息安全的目标。